| Author |
 Topic  |
|
|
dgregorius
New Member
USA
6 Posts |
 Posted - Apr 23 2019 : 5:58:06 PM
|
I tried to install the latest update yesterday and due to the broken link it seems it destroyed my installation. When I start Visual Studio 2017 (Community Edition) Visual Assist is not showing in the menu bar anymore and it also doesn't seem to be active. It shows to be installed and enabled in Tools -> Extension and Updates.
I tried re-installing both the current and last version, but the problem persists. I also tried to disable and re-enable in Tools -> Extension and Updates with no success.
This is very frustrating. Any ideas? |
|
|
accord
Whole Tomato Software
United Kingdom
3287 Posts |
Posted - Apr 23 2019 : 9:47:30 PM
|
Have you tried to completely uninstall Visual Assist from the extension manager, and restart Visual Studio before you try installing it again?
Also, after the uninstall and restart, can you please try installing Visual Assist via the extension manager rather then the exe installer to see if it makes any difference? |
Edited by - accord on Apr 23 2019 9:48:16 PM |
 |
|
|
dgregorius
New Member
USA
6 Posts |
Posted - Apr 27 2019 : 7:00:11 PM
|
Thanks! I tried all this. In the end I un-installed VS2017 and then installed VS2019. I wasn't planning on upgrading yet, but now it is working again. Pretty annoying issue.
|
|
|
|
feline
Whole Tomato Software
United Kingdom
19020 Posts |
Posted - Apr 29 2019 : 10:46:46 AM
|
In case you wanted to stick with VS2017 a bit longer, a repair of your install might fix the problem, without having to change IDE's.
Assuming you still have access to VS2017, try running the command:
"C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\Common7\IDE\devenv.exe" /RootSuffix VATest
this will load VS2017 with a new, default profile, so you will normally be asked about the settings you want to use. VA will not be installed, but you will be able to download and install VA from the online extension store:
IDE tools menu -> Extensions and Updates...
and install it for this profile. If the problem is due to a problem with your default profile then VA should work correctly here. To load your default profile load VS2017 normally. To return to this profile use the same command line switch again. |
zen is the art of being at one with the two'ness |
|
|
|
PHansson
New Member
Sweden
2 Posts |
Posted - May 27 2022 : 12:12:43 PM
|
quote:
Originally posted by feline
In case you wanted to stick with VS2017 a bit longer, a repair of your install might fix the problem, without having to change IDE's.
Assuming you still have access to VS2017, try running the command:
"C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\Common7\IDE\devenv.exe" /RootSuffix VATest
this will load VS2017 with a new, default profile, so you will normally be asked about the settings you want to use. VA will not be installed, but you will be able to download and install VA from the online extension store:
IDE tools menu -> Extensions and Updates...
and install it for this profile. If the problem is due to a problem with your default profile then VA should work correctly here. To load your default profile load VS2017 normally. To return to this profile use the same command line switch again.
Having the same problem as OP in VS2019 with latest VA builds - tried reinstalling VA and re-enabling to no avail.
Then I tried your steps here. I do get VA running inside a different profile specified by /RootSuffix. However, I would rather not be forced to ever run with this command line argument. So is there a way to reset the default profile, or do something else to solve the problem? Just doing a settings reset doesn't work (not too surprising).
Thanks in advance. |
Edited by - PHansson on May 27 2022 12:13:07 PM |
|
|
|
feline
Whole Tomato Software
United Kingdom
19020 Posts |
Posted - May 27 2022 : 12:39:21 PM
|
Thank you for trying this, and yes, it is fairly easy to reset the default profile. Before doing so can you please make sure you export your VA and IDE settings, just to be on the safe side, since doing this will reset all of your IDE settings, and you might want them back again afterwards:
VA Options -> Performance -> Export Settings
IDE tools menu -> Import and Export Settings -> Export selected environment settings
Now close all instances of the IDE and you need to locate the VS2019 default profile directory, which should be:
C:\Users\%USERNAME%\AppData\Local\Microsoft\VisualStudio\16.0*
There should be two directories matching this pattern, both with a hashed directory name. The test profile directory will have VATest on the end of the hashed name, while the default profile will have the shorter directory name. Go into the default profile directory, and then delete the file:
C:\Users\%USERNAME%\AppData\Local\Microsoft\VisualStudio\16.0_*\privateregistry.bin
Now load the IDE, tell it what settings you want to use, and if you go to:
IDE Extensions menu -> Manage Extensions
Visual Assist should still be installed, but shown as disabled. You can now enable Visual Assist, which will require an IDE restart to take effect. Everything should now, hopefully, work correctly in your default profile, and you can reimport your IDE settings, which should be quite safe. |
zen is the art of being at one with the two'ness |
|
|
|
PHansson
New Member
Sweden
2 Posts |
Posted - May 27 2022 : 2:46:55 PM
|
quote:
Originally posted by feline
Thank you for trying this, and yes, it is fairly easy to reset the default profile. Before doing so can you please make sure you export your VA and IDE settings, just to be on the safe side, since doing this will reset all of your IDE settings, and you might want them back again afterwards:
VA Options -> Performance -> Export Settings
IDE tools menu -> Import and Export Settings -> Export selected environment settings
Now close all instances of the IDE and you need to locate the VS2019 default profile directory, which should be:
C:\Users\%USERNAME%\AppData\Local\Microsoft\VisualStudio\16.0*
There should be two directories matching this pattern, both with a hashed directory name. The test profile directory will have VATest on the end of the hashed name, while the default profile will have the shorter directory name. Go into the default profile directory, and then delete the file:
C:\Users\%USERNAME%\AppData\Local\Microsoft\VisualStudio\16.0_*\privateregistry.bin
Now load the IDE, tell it what settings you want to use, and if you go to:
IDE Extensions menu -> Manage Extensions
Visual Assist should still be installed, but shown as disabled. You can now enable Visual Assist, which will require an IDE restart to take effect. Everything should now, hopefully, work correctly in your default profile, and you can reimport your IDE settings, which should be quite safe.
Perfect, that worked! Thanks so much, this was a very vexing issue overall and I'm glad I found this thread. |
|
|
|
feline
Whole Tomato Software
United Kingdom
19020 Posts |
Posted - May 30 2022 : 08:07:25 AM
|
Excellent news, thank you for the update, I am glad that everything is working correctly once more  |
zen is the art of being at one with the two'ness |
|
|
|
ETA76
New Member
Netherlands
2 Posts |
Posted - Sep 18 2023 : 05:13:45 AM
|
quote:
Originally posted by feline
C:\Users\%USERNAME%\AppData\Local\Microsoft\VisualStudio\16.0*
There should be two directories matching this pattern, both with a hashed directory name. The test profile directory will have VATest on the end of the hashed name, while the default profile will have the shorter directory name. Go into the default profile directory, and then delete the file:
C:\Users\%USERNAME%\AppData\Local\Microsoft\VisualStudio\16.0_*\privateregistry.bin
This seems to have solved my freezing problem. Thanks. |
|
|
|
feline
Whole Tomato Software
United Kingdom
19020 Posts |
Posted - Sep 18 2023 : 05:44:40 AM
|
| Thank you for the update, I am glad that this fixed the problem. Having done this, hopefully this will stay fixed and you won't have any further problems like this. |
zen is the art of being at one with the two'ness |
|
|
| |
Topic |
|
|
|
Visual Assist Menu not Showing
